We will be closed on December 25 and January 1 in observance of the holidays. Please note that shipping and order processing may be delayed during this time.
 
 
L-com

900 MHz Industrial Wireless Ethernet Radio Bridge Pair

SKU AVL-AW900F-PAIR
Available to Ship Call us

Product no longer available

This product has been discontinued and has run out of stock. We apologize for the inconvenience.

Please contact our customer service team for assistance in identifying the appropriate replacement part for your application.

Replaced By:


AvaLAN’s AW900F Industrial Wireless Ethernet Radio that uses the latest in FHSS (Frequency Hopping Spread Spectrum) technology to deliver long range, secure wireless networking at a significantly lower cost.

The AW900F radios include a built-in web browser interface for remote configuration, status monitoring and firmware update. An operator at the main HMI (Human to Machine Interface) console can log in to each radio’s fixed IP address to facilitate troubleshooting. There is a small LCD panel on the front of the unit can also verify proper operation at a glance.

This radio operates in the unlicensed 900 MHz ISM band. Data is communicated robustly and error free despite interference from noise or other signal sources. Both point-to-point bridge and point-to-multipoint star network connections are supported. It is able to transmit legally up to one watt of RF power, line of sight distances up to 60 miles can be bridged using directional antennas. 900 MHz operation also allows the radio signals to penetrate through walls and foliage.

For government validated data security, check out the AW900FS that has FIPS 140-2 Level 2 encryption.

For complete product specifications and manuals, click on the Downloads tab.


Features
  • Data Security enhanced by AES 128-bit encryption
  • Includes (2) AW900F radios and (2) 2.5 dBi omni-directional antennas
  • Rugged extruded aluminum case with DIN Rail mounting clip
  • 1 Watt RF transmit power for up to 60 mile range, 200 Kbps FHSS RF data rate
  • 802.3af compatible Power over Ethernet for single cable installation

Application
  • Data collection applications
  • Industrial automation
  • SCADA applications


Product Resources

Product Compliance

Product Compliance

REACH status
Not Available
RoHS status
Not Available
TSCA status
Not Available
PFAS status
Not Available

For any of the above statuses that are not available, we may be able to obtain the data by contacting various compliance specialists within our supply chain. You may ask our Compliance Department if that information can be obtained by clicking the contact us button below.