The PSW4824-POE is a Power-over-Ethernet (PoE) Injector/Midspan with integral 48VDC, 24 Watt power supply. It provides 48VDC power for multiple* PoE-equipped devices by "Injecting" DC power through the CAT5 Ethernet cable. It is compatible with Access Points and other equipment supporting the IEEE standard PoE pinout (Pins 4 & 5 Power + / Pins 7 & 8 Power -) and the 48VDC power requirement.
*The total number of devices that can be powered will depend on the power requirements of each device used.
Compact Wall Mount Design
Since the PSW4824-POE is completely self-contained, a separate power supply and injector is not required. It can be plugged directly into a wall electrical outlet, eliminating the need for additional power cables. The compact size makes it ideal for crowded equipment enclosures. The PSW4824-POE can convert any of L-com's 120VAC industrial enclosures into a 48VDC PoE ready enclosure.
Built in protection circuits
The PSW4824-POE feature built in over voltage, over current and short circuit protection. If an overload is detected, the power shuts down automatically; when the overload is cleared, the power is restored.
For additional information and complete specifications, click on the data sheet link below.
Features
- Integral 48VDC @ 24W power supply
- Built in protection circuits
- Compact design
- IEEE 802.3af/at compatible
- No additional power cables required
Application
- 48VDC Power-Over-Ethernet devices
- 48VDC IP surveillance cameras
- 48VDC VoIP (Voice over Internet Protocol) telephones
- 48VDC wireless LAN PoE Access Points and Bridges
- Can be used with any of L-com's 120V weatherproof enclosures with 120VAC outlets
