Plenum Rated Low PIM RG401 and RG402 Coaxial Bulk Cable - Available by the Foot
Plenum rated low PIM bulk coaxial cables provide high-performance solution ideally suited for distributed antenna systems (DAS), 4G/LTE cellular networks, wireless infrastructure, and RF applications requiring low passive intermodulation performance. Available in RG401 and RG402 configurations sold by the foot supporting custom installation requirements, these cables feature 50 ohm impedance with -160 dBc PIM rating and 100 dB minimum shielding effectiveness. Constructed with silver-plated copper center conductor, PTFE dielectric, tinned copper braid shield, and FEP jacket supporting -55°C to +125°C operation.
For comprehensive low PIM coaxial solutions beyond bulk cable, explore our Low PIM Coax Connectors, Adapters, Combiners, Lightning Surge Protectors & Bulk Cable category, featuring low PIM connectors, adapters, lightning surge protectors, and RF splitters/combiners for DAS and wireless infrastructure applications.
Related Categories:
- Low PIM 50 Ohm Coax Connectors
- Low PIM 50 Ohm Coax Adapters
- Low PIM 1/4 Wave Coax Lightning & Surge Protectors
- Low PIM DAS RF Splitter / RF Combiner
FAQs
What are plenum rated low PIM bulk coax cables used for in wireless systems?
Plenum rated low PIM bulk coaxial cables are ideally suited for distributed antenna systems (DAS), 4G/LTE cellular networks, wireless infrastructure, and RF applications where low passive intermodulation performance is required. These cables are commonly used in low PIM cable assemblies, wireless communication systems, and 4G/LTE cellular deployments where controlled RF performance and low interference levels are essential. The bulk cable format allows installers to cut custom lengths meeting specific routing requirements while maintaining consistent electrical performance.
What passive intermodulation performance do plenum rated low PIM bulk coax cables provide?
Plenum rated low PIM bulk coaxial cables feature passive intermodulation performance rated to -160 dBc supporting distributed antenna systems and wireless infrastructure requiring minimal intermodulation distortion. The -160 dBc PIM rating enables clean multi-carrier RF transmission in 4G/LTE networks minimizing interference between RF channels. Low PIM performance supports reliable wireless communication in dense cellular deployments requiring controlled RF environments.
What conductor construction ensures plenum rated low PIM bulk coax cable quality?
Plenum rated low PIM bulk coaxial cables utilize silver-plated copper center conductor, PTFE dielectric, tinned copper braid shield, and durable FEP jacket construction optimized for low passive intermodulation. Silver plating on center conductor provides superior conductivity reducing PIM generation. The complete cable construction from conductor through jacket minimizes discontinuities that cause intermodulation in DAS, 4G/LTE, and wireless infrastructure systems.
What plenum rated low PIM bulk coax cable configurations support different installations?
Plenum rated low PIM bulk coaxial cables are available in RG401 and RG402 configurations sold by the foot supporting custom installation requirements in distributed antenna systems and wireless networks. The RG401 offers larger diameter (0.275 inches) supporting lower attenuation while RG402 provides compact size (0.163 inches) for space-constrained installations. Multiple configurations enable selection of optimal cable for specific DAS routing and performance requirements.
What attenuation characteristics do RG401 and RG402 cables provide?
RG401 low PIM cables feature typical attenuation of 5.7 dB per 100 feet at 500 MHz, 8.4 dB at 1000 MHz, 15.4 dB at 3000 MHz, while RG402 provides 4.7 dB per 100 feet at 150 MHz, 8.2 dB at 450 MHz, and 11.6 dB at 900 MHz. The different attenuation profiles enable frequency-specific cable selection in DAS and wireless infrastructure deployments. System designers can select cable type matching specific frequency requirements and acceptable signal loss in 4G/LTE networks.
What temperature range supports plenum rated low PIM bulk coax cable deployment?
Plenum rated low PIM bulk coaxial cables support operating temperatures ranging from -55°C to +125°C making them suitable for wide variety of indoor RF distribution and outdoor wireless infrastructure applications. The extended temperature range accommodates both climate-controlled buildings and outdoor base station installations in 4G/LTE networks. Temperature capability ensures reliable low PIM performance across diverse deployment environments in distributed antenna systems.
What shielding effectiveness do plenum rated low PIM bulk coax cables provide?
Plenum rated low PIM bulk coaxial cables feature minimum shielding effectiveness of 100 dB providing excellent protection against electromagnetic interference in distributed antenna systems and wireless networks. The high shielding effectiveness combined with tinned copper braid construction prevents external RF sources from coupling into cable. Superior shielding supports clean signal transmission in 4G/LTE cellular networks minimizing unwanted interference.
Need assistance selecting the right plenum rated low PIM bulk coax cable for your DAS, 4G/LTE, or wireless infrastructure installation? Our engineering team provides expert technical guidance on RG401 vs. RG402 selection, attenuation requirements, bend radius constraints, and custom cable length specifications for your specific distributed antenna system, cellular network, or wireless infrastructure application requirements.
Contact Sales:Sales@L-com.com
Product Technical Support:techsupportrf@infiniteelectronics.com
L-com has one of the largest in-stock selections of low PIM coaxial cable available for domestic and international orders. We are a global leader in wired and wireless connectivity products providing solutions for electronics, medical, industrial automation, military, and telecommunications.
